E-Bike Care Guide - Mokwheel Basalt ST Bedienungsanleitung

E-bike Care Guide

To ensure safe riding conditions you must ensure
your e-bike is properly maintained.
For your safety, follow these basic guidelines and
see your certified e-bike mechanic regularly.
1.
Never immerse the bike or any components in water
because this action may damage the electrical system.
2.
Periodically check wiring and connectors to ensure there
are no damages and the connectors are secure.
3.
Clean and wipe the frame with a damp cloth soaked in a
mild non-corrosive detergent mixture and dry with a cloth.
4.
Store under shelter; avoid leaving the bike in the rain or
exposed to corrosive materials. If you leave the bike in a
wet condition, dry your bicycle afterward and apply
anti-rust treatment to the chain and other unpainted steel
surfaces.
5.
Riding on the beach or coastal areas may expose your bicycle
to corrosive salt. Wash your bicycle frequently, and wipe or
spray all unpainted parts with anti-rust treatment.
6.
If the hub or bottom bracket bearings have submerged in
water, they should be taken out and re-greased to prevent
deterioration.
7.
If the paint has become scratched or chipped on any metal,
use touch-up paint to prevent rust. Clear nail polish can also
be used as a preventative measure.
8.
Regularly clean and lubricate all moving parts, tighten compo-
nents and adjust as required.
9.
Damage from corrosion is not covered under warranty, give
your bike special care to prevent corrosion and extend it's
product life.
027