Magnat MC 400 Wichtige Hinweise Zur Installation / Garantieurkunde Seite 19

OPERATIONAL ELEMENTS AND CONNECTIONS - REMOTE CONTROL
13 HOME/PLAY/PAUSE/SELECT
CD/USB mode:
Starts or pauses the playback.
Menu:
Confirm the entry.
Home (net radio mode):
Press and hold to return to the main menu.
14 STOP/RETURN
CD/USB mode:
Stops the playback.
Net radio mode:
Jumps one step backwards in the selection
menu.
15 CD CONTROL: PROGRAM/RANDOM/
REPEAT
PROGRAM
Programming tracks on a CD in a particular
order.
The Stop mode must be activated to programme
tracks.
• Press the PROG button.
Display: PRG 01-00
• Now assign the desired track to memory
location 01 by selecting the track number via
the numeric keypad or the SKIP button.
Display e.g.: PRG 01-08
• Press the PROG button again.
Display: PRG 02-00
• Now enter the desired track for memory
location 02.
• Repeat these steps until all of the desired
tracks have been programmed. After the last
title, press the STOP button. The number of
programmed titles and the total playing time
of the programme list are displayed.
• Start playback of the program list by pressing
PLAY. A ‚PRG' symbol is displayed, along with
the current track number and elapsed time of
the track.
• You can manipulate playback within the
programmed list by pressing SKIP, SEARCH
and PAUSE/PLAY.
• The programme is erased after pressing the
STOP or EJECT button.
NET RADIO MODE
Saves your internet radio favourites (see also
MUSIC PLAYBACK VIA NET RADIO).
RANDOM
Playback of tracks in a random order when CD
or USB mode is selected..
• Press once: The function is activated.
The following appears in the display:
REPEAT
Repeat playback of a track/CD/USB medium:
• Press once: The current track is repeated.
The following appears in the display:
• Press twice: The entire CD is repeated.
The following appears in the display:
• Press again: The repeat function is
deactivated.
• The following appears in the display when
simple playback is selected:
16 AUTO (DAB MODE)
This function scans the DAB frequency range
(band III) for stations. These can then be
accesses via the TUNING buttons. When the
MC 400 is switched on for the first time, it will
automatically start searching for stations. The
stations that are found can then be called up
by using the TUNING buttons.
17 SLEEP
The MC 400 has a SLEEP function that will
switch off the device after a set time. A time can
be set between 0 – 240 minutes in
30-minute increments. INFO: The sleep function
will remain activated until it is switched off again!
The following appears in the display:
18 BT (DISCONNECT BLUETOOTH MODE)
Pressing and holding this button for a few
seconds will disconnect an existing Bluetooth
connection and start the pairing mode.
19 EJECT
Ejects or retracts the inserted CD.
19