Maintenance / Repair - i.safe MOBILE IS-DS930.1 Kurzanleitung

The device may only be used outside ex-hazardous areas.
Through integrated fuses, every available accessory may be used.
Physical connections to other equipment are only allowed outside ex-hazardous areas .
The device may only be used at ambient temperatures between +5°C ... +35°C.
The device may not be exposed to any aggressive acids or alkalis.
The device is only for the use in combination with:
Type of tablet
IS910.1
IS910.2
RG910
IS930.1
IS930.2
IS930.RG
IS930.M1
FURTHER SAFETY ADVICES
Charge Use the device under dry indoor conditions only.
Do not charge use the device near any flammable or explosive substances.
Do not charge use the device in environments with much dust, humidity, or excessively high
or low temperatures.
Do not use charge the device in environments with much dust or humidity.
Do not use the device in areas where regulations or legislatives prohibit the use.
Do not expose the device or charger to strong magnetic fields, such as are emitted from
induction ovens or microwaves.
Do not attempt to open or repair the device.
Improper repair or opening can lead to the destruction of the device, fire or explosion.
Only authorized personnel are allowed to repair the device.
Do not use any chemical cleaning agents to clean the device or the charger. Use a damp and
anti-static soft cloth for cleaning.

MAINTENANCE / REPAIR

Please note any legal requirements for periodic inspection. The device itself has no user-servi-
ceable parts. It is recommended to perform inspections according to the safety regulations and
advises. If there is a problem with the device, please contact your vendor or consult the service
center. If your device is in need of repair, you can either contact the service center or your vendor.
IS-DS930.1
RJ45 Ethernet supported with minimum AOS8
P
and firmware status 20190410
P
P
P
P
P
P
EN 5