Werbung
FOR LOUDSPEAKERS WITH KEYHOLE TYPE FIXING
Secure universal bracket(h)to upright pole using screw (i). The speaker cable should be threaded through pole and bracket as
shown in fig 3a. Or 3b. Assemble thumbnut (T) washers (S) and M4 screw (Q) as shown. Attach speaker, if required tighten
thumbnut. Install bracket cover cap (K) if required.
FOR LOUDSPEAKERS WITH THREADED HOLE
Secure universal bracket(h)to upright using screw (i). The speaker cable should be Connected to the speaker and threaded
through the upright as shown in fig 3a or 3b. The speaker should be fixed to bracket (H) Using washer (R) and either screw (O)
or (P) depending on speaker type, Fit cover cap (K) if required.
6
Werbung
