Maintenance And Cleaning - Mestra MULHACEN Bedienungsanleitung

English

MAINTENANCE AND CLEANING

To ensure a correct, reliable and durable performance of
the unit we strongly recommend:
 Diamond discs are very heat-sensitive: Do not trim
or rectify metal pieces or coatings.
 After using the unit, clean the dust and plaster
remains from the table (B) and the front cover.
 Do not use alcohol or any other solvent to clean the
unit.

Never immerse the unit in a liquid.
 If you notice unusual noises or vibrations, send the
unit to a technical assistance service.

Replace the abrasive disc whenever you notice a
significat fall in performance.
 After replacing the disc, check that there are not
unusual vibrations.

The unit has been designed to operate correctly
leaning on the four rubber blocks in its base. These
elements are strong enough to bear the movement of
the trimming.
PRECAUTIONS
Before connecting the unit to the power source,
♦
make sure the voltage is correct.
♦ When trimming a model, protect yourself suitably.
Always wear gloves, safety goggles, and a mask.
Use proper clothes. No baggy clothes, ties,
necklaces, rings, bracelets or elements that could be
hooked by the machine. Be careful with long hair.
Always use the wateRef. cleaning system to clean
♦
the discs.
♦ Do not allow children or unskilled personnel to
operate the unit.
10
♦ Do not allow anybody to by-pass the safety micro-
switch that detects that the cover/door is closed or
to operate the unit when the cover/door is open.
♦ If the motor shaft jams during normal operation,
disconnect the unit from the power source before
trying to free the shaft by forcing its rotation
manually.
♦ Do not polish, brush, or grind materials that could
release particles that are toxic when inhaled.
Before using the unit, make sure it is placed on a
♦
firm and solid base.
Do not use the unit close to solvents or other
♦
inflammable materials.
♦ When replacing the disc, make sure that the
sprinkler (I) is in good condition and free from
plaster.
♦ When installing the unit, make sure that the disc-
cleaning circuit is perfectly leak-proof.
Do not trim materials for wich the unit has not been
♦
designed, especialy metal objects.
Do not handle or adjust the table when the unit is
♦
working.
SPECIFICATIONS
Power:
Speed:
Voltage:
Fuse:
Sound power:
Abrasive disc diameter:
Height:
Width:
Length:
Weight:
1600 W
3000 rpm
230 V, 50/60 Hz
Glass 15 A, 110-240 V
< 70 dBA
250 mm
340 mm
420 mm
345 mm
14.5 kg