Description Of The Appliance (Fig. 1); Preparation For Use - Eta 2166 Bedienungsanleitung

– Use this appliance only for the purpose for which it was designed as specified in this
user's manual. Never use the appliance for any other purpose.
– The producer does not undertake any responsibility for damage caused by improper use
of the appliance (e.g. deterioration of food, injury, burning, scalding, fire, etc.) and
its guarantee does not cover the appliance in the case of failure to comply with the safety
warning above.
II. DESCRIPTION OF THE APPLIANCE (Fig. 1)
A – toaster
A1 – toasting guide
A2 – revolving toasting regulator
A3 – STOP button with control light of the operation
A4 – / button with control light
A5 – / button with control light
A6 – power supply
B – breadcrumbs tray
C – crispy pastry baking tools
Note: When the control light is on, it signals that the function is on.
1
III. PREPARATION FOR USE
Plug the power cord connector A6 to an electric socket. When you put the appliance into
operation for the first time, set the revolving regulator to level 3 and switch on the toaster
at least 4–5 times (without any bread in) with a window open and then leave to cool down.
Moderate smoke for a short time does not mean any defect. Now the appliance is ready for
operation.
Toasting regulator (A2)
Set the required toasting level by turning the regulator clockwise. If in doubt, start from
the lowest level.
B
C
A
A5 A2+A3
17 / 37
GB
A4
A1
A6