Changing The Bulb; Technical Specifications - Eazyzap DF756 Bedienungsanleitung

UK

Changing the Bulb

WARNING: Always disconnect the appliance from the power supply before changing the
bulb.
1. Unscrew the collection tray [Fig. 1].
2. Lay the appliance on the side.
3. Unscrew the two screws holding the bottom plate [Fig. 2].
4. Hold the ends of the bulb and just pull to remove it from its socket.
5. Replace with a new bulb.
6. Re-locate the bottom plate and screws.
7. Screw the collection tray back into place.
1
Troubleshooting
Fault
The The unit is not switched on
appliance is
not working
Plug or lead is damaged
Fuse in the plug has blown
Power supply
Tube has expired
Tube is faulty or has not been fitted
correctly

Technical Specifications

Model Voltage
DF756
220-240V~ 50-60Hz
4
DF756_ML_A5_v1_20210519.indb 4 DF756_ML_A5_v1_20210519.indb 4
Probable Cause
Dimensions
Power
h x w x d (mm)
19W 315 x 170 x 165
2
Bottom plate
Solution
Check the unit is plugged in correctly and
switched on
Call EAZYZAP agent or qualified Technician
Replace the plug fuse
Check power supply
Refer to the 'Changing the Bulb' section
Weight
1.05kg
Lamp type
PL 18W
2021/5/19 17:11 2021/5/19 17:11