XTZ DIVINE ALPHA Bedienungsanleitung Seite 13

Active Crossover Drive
1. To connect the drivers directly to the speaker terminal it is necessary to remove
the terminal plate by unscrewing the 10 hex-screws.
2. When unscrewed, carefully remove the terminal plate and the crossover, be aware
that the internal cables should follow smoothly to no damage the connections.
3. On the terminal inside, gently disconnect the blade connectors.
4. Disconnect the driver cables from the passive crossover.
(picture to the left.)
5.Connect the driver cables directly to the terminal blade connectors, like the picture
to the right.
6. Carefully screw back the terminal plate.
NOTE:
It is possible to combine the Passive & Active Crossover drive, e.g. Tweeter & Midwoofer can be connected to the passive
13
crossover and the woofers can be directly connected to an external active crossover.
ACTIVE/DIRECT CROSSOVER DRIVE
TERMINAL INSIDE
(5.)
-
- TWEETER
-
- MIDWOOFER
-
- WOOFER 1
- WOOFER 2
T
+
M
+
MIDWOOFER +
W
+
WOOFER 1 +
-
+
WOOFER 2 +
(5.)
TWEETER +