Herunterladen Inhalt Inhalt Diese Seite drucken

Introduction; Safety Instructions; Quick Setup - XTZ CINEMA M8 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Introduction

We would like to thank you for buying XTZ Cinema series. The speakers of the Cinema series offer a large
numbers of possibilities. In order to utilize your new speakers in the best possible way, please read this
manual carefully before using your speakers for the first time. It often takes some effort and patience to
make a HiFi system sound its best. If you don´t have any previous experience from this kind of installations,
please feel free to contact our free of charge support and we will help you. (See Support on the last page
of this manual)

Safety instructions

Switch off your amplifier before connecting the new speakers. Make sure that the speaker cables are tight-
ened and have a strong connection to the speaker terminal and amplifier terminal.
Make sure that the speakers are not exposed to direct sunlight or strong artificial light.
Listening to high sound pressure levels over a longer period of time may harm your hearing. To avoid audi-
tory effect do not listen to high sound levels over a longer period of time.

Quick Setup

The initial set-up of a XTZ loudspeaker is relatively easy. Please take your time reading the guidelines and
more detailed instructions on the following pages of this manual after completing the first four steps as listed
below.
1. Unpacking. Carefully remove the loudspeaker from the packaging and position it with its underside on
the floor. Do not use any sharp objects for the unpacking since they may scratch the speakers. We strongly
recommend that you keep the box and packaging materials for future use.
2. Positioning. Place the loudspeaker facing the listening area at its desired position in the room.
3. Connecting. While the amplifier is switched off, connect each loudspeaker to the amplifier with the speak-
er cable. Turn the volume level all the way down and power the amplifier on.
4. Listening. The loudspeaker is now ready to play. Optimal performance will only be realized after careful
positioning and running the speakers as described over the course of the following pages. Enjoy your new
XTZ loudspeakers!
Feel free to contact the XTZ free of charge service with any further questions or for additional assistance.
4

Werbung

Kapitel

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

M8 tower

Inhaltsverzeichnis