Westfalia 85 41 21 Originalanleitung Seite 6

OPERATION
Assembly
The hand truck is delivered preassembled. Slide the wheel arrays onto the axles
and add the silver washers. Secure the arrays with the included clamping caps.
The clamping caps must be driven onto the ends of the axles tightly. Use a rubber
or plastic mallet to avoid damaging the material. After that, remove the
protective film from the caps.
Operation
The hand truck can be collapsed. To do so push the red knobs on the lower cross
brace to the centre. Now you can collapse or extend the hand truck. Before using
the hand truck make sure the safeties have engaged tightly.
Dimensions
Operational: .......................... 1110 x 480 x 610 mm (H x W x D)
Collapsed: ............................. 730 x 480 x 365 mm (H x W x D)
Dimensions of the Toe Plate: 290 x 300 mm
Wheel Diameter and Width: . 155 x 33 mm
Weight: ................................. 10.4 kg
Load Capacity: ....................... 120 kg
6