Item No.
1
2
Installing the Cradle
1.
Remove the screws and the cradle from the plastic bag.
2.
Attach RAM base to the cradle by tightening the four screws.
3.
With the cradle attached to the RAM base, install the device to RAM suction mount.
4.
Lock and unlock the suction mount by twisting the lock.
5.
Install the suction mount on smooth non-porous surface.
Note: For best result, install the suction mount on glass surface.
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and
the Stylized M logo are trademarks or registered
trademarks of Motorola Trademark Holdings, LLC and
are used under license. All other trademarks are the
property of their respective owners.
© 2022 Motorola Solutions, Inc. All rights reserved.
Printed in
Vehicle Cradle and Mount
PMPN4638_
Quick Start Guide
1
Description
Arm, accessory kit, RAM mount
Vehicle Cradle
Loosen the short arm before adjusting the cradle.
M
2
Part No.
HW001865A01
HN002069A01
*MN009421A01*
MN009421A01-AA