Ruijie Reyee RG-M18 Benutzerhandbuch Seite 9

FAQs
What can I do if I forget the management password?
Try the Wi-Fi password which may be the same as the management password.
If it does not work, please restore the device to factory settings.
How to restore the factory settings?
Power on the router and wait for 2 to 3 minutes until it is started. Use
a pin to press and hold the Reset button on the rear side for over 10 seconds until
the system status indicator starts blinking, and then release the button.
After the system status indicator turns solid on, the router will broadcast SSID
@Ruijie-sXXXX,
indicating that the router is restored to factory settings successfully.
Can I connect routers with Ethernet cables?
Yes, and wired connection is more stable. Insert one end of the Ethernet cable
into the WAN port (yellow) of the secondary router and connect the other end
to the LAN port (black) of the primary router.
6