Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
˜ Troubleshooting
Fault
The product does not work .
The suction power is reduced
and the product does not
vacuum any dirt .
The suction power is reduced
even after cleaning the pleated
filter
.
21 ]
[
The product overheats .
Dust escapes from the product . The container lid
Possible cause
The power plug
is not
[
18 ]
connected to the power supply .
The metal container is
5 ]
[
The air path is blocked .
The pleated filter
is
21 ]
[
clogged .
The pleated filter
is
[
21 ]
damaged .
Mesh wire
or
22 ]
[
pleated filter
clogged .
[
21 ]
was not
[
14 ]
installed correctly .
Action
Connect the power plug
a suitable power supply .
full .
Empty the metal container
(see "Emptying the metal
container") .
Check the following parts for
blockages and remove them:
Metal container
[
5 ]
Straight nozzle
[
6 ]
Crevice nozzle
7 ]
[
Hose
9 ]
[
Clean the pleated filter
(see "Cleaning the pleated
filter") .
Replace the pleated filter
(see "Replacing the pleated
filter")
Clean the mesh wire
pleated filter
21 ]
[
the pleated filter") .
Install the container lid
correctly (see "Fixing and
removing the container lid") .
with
18 ]
[
5 ]
[
21 ]
[
21 ]
[
and the
[
22 ]
(see "Cleaning
[
14 ]
GB
17
Werbung
Inhaltsverzeichnis
