To Change In Which Direction The Motor Rotates - Husqvarna PG 510 Bedienungsanweisung

• Plastic bonded tool attached to resin holder disc.
• Grinding head with 3 resin holder discs and tools
To do before you operate the product
1. Read the operator's manual carefully and make sure
that you understand the instructions.
2. Do daily maintenance. Refer to
page 14 .
3. Make sure that the product is assembled correctly
and is not damaged.
4. Put the product on the work area.
5. Make sure that there are diamond tools on the tool
plate and that they are tightly attached.
6. Connect the dust extractor to the product. Refer to
To connect a dust extractor on page 13
7. Adjust the handlebar to set the necessary work
height.
8. Make sure that the motor cable is connected to the
electrical enclosure before the product is connected
to an electric socket.
9. Connect the power plug of the product into the mains
outlet.
1146 - 002 - 09.12.2022
Maintenance on
10. Turn the emergency stop button clockwise to make
sure that the emergency stop is disengaged.
11. Make sure that you know in which direction the
motor rotates.

To change in which direction the motor rotates

CAUTION:
to rotate in only one direction.
1. Look at the arrow to see in which direction the motor
rotates.
The Piranha tools are made
11