Herunterladen Diese Seite drucken

Viessmann 6333 Bedienungsanleitung Seite 3

Flutlichtstrahler rechteckig, led weiß
Vorschau ausblenden Andere Handbücher für 6333:

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

5. Gewährleistung
Jeder Artikel wurde vor Auslieferung auf volle Funktionalität
geprüft. Der Gewährleistungszeitraum beträgt 2 Jahre ab
Kaufdatum. Tritt in dieser Zeit ein Fehler auf und Sie finden
die Fehlerursache nicht, nehmen Sie bitte Kontakt mit uns auf
(service@viessmann-modell.com). Senden Sie uns den Artikel
zur Kontrolle bzw. Reparatur bitte erst nach Rücksprache zu.
Wird nach Überprüfung des Artikels ein Herstell- oder Material-
fehler festgestellt, wird er kostenlos instand gesetzt oder aus-
getauscht. Von der Gewährleistung und Haftung ausgeschlos-
sen sind Beschädigungen des Artikels sowie Folgeschäden,
die durch unsachgemäße Behandlung, Nichtbeachten der Be-
dienungsanleitung, nicht bestimmungsgemäßen Gebrauch,
eigenmächtigen Eingriff, bauliche Veränderungen, Gewaltein-
wirkung, Überhitzung u. ä. verursacht werden.
6. Technische Daten
Betriebsspannung:
Stromaufnahme:
Änderungen vorbehalten. Keine Haftung für Druckfehler und
Irrtümer.
Die aktuelle Version der Anleitung finden Sie auf der Viess-
mann Homepage unter der Artikelnummer.
1. Important information
Please read this manual completely and attentively before
using the product for the first time. Keep this manual. It is part
of the product.
1.1 Safety instructions
Caution:
Risk of injury!
Due to the detailed reproduction of the original and the
intended use, this product can have peaks, edges and
breakable parts. For installation tools are required.
Electrical hazard!
Never put the connecting wires into a power socket!
Regularly examine the transformer for damage. In case of
any damage, do not use the transformer!
Make sure that the power supply is switched off when you
mount the device and connect the cables!
Only use VDE/EN tested special model train transformers for
the power supply!
The power sources must be protected to prevent the risk of
burning cables.
1.2 Using the product for its correct purpose
This product is intended:
-
For installation in model train layouts and dioramas.
-
For connection to an authorized model train transformer
(e. g. item-No. 5200).
-
For operation in dry rooms only.
Using the product for any other purpose is not approved and
is considered incorrect. The manufacturer is not responsible
for any damage resulting from the improper use of this
product.
3
(mit und ohne 5215 Powermodul)
Entsorgen Sie dieses Produkt nicht über den
(unsortierten) Hausmüll, sondern führen Sie
es der Wiederverwertung zu.
13 – 24 V Digitalsignal
EN
10 – 16 V AC ~
14 – 24 V DC =
ca. 10 mA

Werbung

loading