Bluetooth ® Pairing - Hama 00184155 Bedienungsanleitung

7. Bluetooth pairing
®
Note - pairing
• Ensure that the Bluetooth
activated.
• Please refer to the operating instructions of your device for more information.
• When the product is switched on for the first time, pairing begins automatically.
• The product and the device should not be more than 1 metre apart. The shorter the distance, the
better.
• Switch the product on using the MFB button (1).
• This product has an integrated Bluetooth
• smartphone) to the product.
7.1 Connection with a device (e.g. smartphone)
You can pair your device with the product using Bluetooth and use it as a playback device. The
basic functions can then be controlled directly via the product (provided the device supports this).
Alternatively, use your device for control.
To connect to your device (e.g. headphones or loudspeaker), connect it using the 3.5 mm AUX cable
included and the audio output (6) on the product.
1
Connecting the product
6s
• If the LED (4) is flashing alternately red and blue:
the product is searching for a Bluetooth
• If the LED (4) lights up blue:
the product is already paired with a Bluetooth
2
Search using your device for the product (only required on the first connection)
Open the Bluetooth
devices shows Hama BT-Rex.
Select Hama BT-Rex and wait until product is listed as connected in your device's Bluetooth
settings.
Note - Bluetooth
Some devices require a password in order to connect to another Bluetooth
• Enter the password 0000 to connect the headphones if your device prompts you to
enter one.
-enabled device is switched on and that the Bluetooth
®
function that allows streaming (e.g. from a
®
Press and hold the MFB button (1) for around 6 seconds
settings on your device and wait until the list of found Bluetooth
®
password
®
connection.
®
device.
®
function is
®
®
®
device.
®
5