Bluetooth ® Pairing - Hama 00 136691 Bedienungsanleitung

G Operating instruction
Thank you for choosing a Hama product.
Take your time and read the following instructions and infor-
mation completely. Please keep these instructions in a safe
place for future reference. If you sell the device, please pass
these operating instructions on to the new owner.
Controls and Displays
1. Multifunction button (Power/Play/Pause/Telephone/
Pairing)
2. + button (Volume up, Previous track)
3. - button (Volume down, Next track)
4. Status LED
5. Micro-USB connection
6. Microphone
7. Opening for retaining clip
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or to
draw your attention to specific hazards and risks.
Note
This symbol is used to indicate additional information or
important notes.
2. Package Contents
• Mini Bluetooth receiver
®
• Micro-USB charging cable
• Adapter 3.5 mm socket – 3.5 mm socket
• Metal clip (for attaching the receiver to clothing or pockets,
for example)
• These operating instructions
3. Safety Notes
• The product is intended for private, non-commercial use only.
• Protect the product from dirt, moisture and overheating,
and only use it in a dry environment.
• Do not use the product in the immediate vicinity of heaters
or other heat sources or in direct sunlight.
• Do not allow yourself to be distracted by the product,
for example when driving a vehicle or operating sports
equipment. Always pay attention to the surrounding traffic
and your environment.
• Do not drop the product and do not expose it to any
major shocks.
• Do not operate the product outside the power limits given
in the specifications.
• Do not open the device or continue to operate it if it
becomes damaged.
• Since the battery is integrated and cannot be removed, you
will need to dispose of the product as a whole. Do this in
compliance with the legal requirements.
• Dispose of packaging material immediately according to
2
locally applicable regulations.
• Do not modify the product in any way. Doing so voids the
warranty.
Warning – Rechargeable battery
• Only use suitable charging devices or USB connections
for charging.
• As a rule, do not use charging devices or USB connections
that are defective and do not try to repair them yourself.
• Do not overcharge the product or allow the battery to
completely discharge.
• Avoid storing, charging or using batteries in extreme
temperatures.
• When stored over a long period of time, batteries should
be charged regularly (at least every three months).
4. Getting started
• The Bluetooth receiver has an integrated lithium polymer
®
battery. Before using the device for the first time, fully
charge the Bluetooth
®
source (USB charger or USB socket on a PC/notebook) and
the supplied USB cable.
• The status LED is constantly lit red during charging.
• Charging begins and ends automatically.
• Once charging has finished, the status LED goes out. The
battery is now fully charged.
5. Operation
5.1 Bluetooth pairing
®
Note
• Make sure that your Bluetooth
is on and Bluetooth
®
• For more information, please refer to the operating
instructions of your terminal device.
• Please connect the Bluetooth
(or AUX) socket of the receiver device (for example, on
the car radio).
• Press the Multifunction button (1) and hold it for 2
seconds, in order to switch on the Bluetooth
activate the discoverable mode (LED (4) flashes blue).
• Then activate the Bluetooth
device (for example, smartphone) and select the device
'Bluetooth Receiver 1'.
®
• The status LED (4) is constantly lit blue – the device is now
connected and ready to use.
Note – Bluetooth password
®
Some terminal devices require a password in order to
connect to another Bluetooth
• If your terminal device requests a password to establish
the connection, enter 0000, 1234, 1111 or 8888.
receiver using a suitable power
-capable terminal device
®
is activated.
receiver to the 3.5 mm jack
®
receiver and
®
function on your transmitter
®
device.
®