Getting Started - Hama 00014168 Bedienungsanleitung

5. Getting started

• The Bluetooth ® receiver has an integrated Li-Po
rechargeable battery. Before using it for the
first time, fully charge the Bluetooth
using the supplied micro-USB cable at a suitable
power source (USB charger or USB port on a PC/
notebook).
• The status LED lights up solid red during the
charging process.
• The charging process begins and ends
automatically.
• Once the charging process is complete, the status
LED goes out - the battery is fully charged.
6. Operation
6.1 Initial connection via Bluetooth® (pairing)
Note
• Ensure that the Bluetooth
switched on and that the Bluetooth
is activated.
• Please refer to the operating instructions of
your device for more information.
• Connect the Bluetooth
3.5 mm plug - 3.5 mm plug audio adapter to the
3.5 mm jack socket (or AUX) on the receiver device
(e.g. car radio).
• Press and hold the On/Off button (3) for around 3
seconds to switch the Bluetooth
to activate search mode (LED (8) flashes blue).
• Then activate Bluetooth
transmitting device (e.g. smartphone) and select
the device "BT13R".
• The status LED (8) lights up solid blue - the device
is paired and ready to use.
receiver
®
® -enabled device is
® function
receiver using the included
®
receiver on and
®
function on your
®
Note - Bluetooth
®
• Some devices require a password in order to
connect to another Bluetooth
• If your device requests a password to connect,
enter the password 0000, 1234, 1111 or 8888.
6.2 Terminating the connection
Press and hold On/Off button (3) for around 3
seconds to terminate the connection and switch
off the device.
6.3 Automatic connection
• For a further connection with Bluetooth
you simply need to switch the device on. The
last transmitting device is pre-set to ensure fast
connectivity.
• If this does not work, establish a new connection
(see Point 5.1 Initial connection via Bluetooth
6.4 Call pick-up / termination
• Pressing the call pick-up button (4) once allows
you to accept a call.
• To end it, press the button again.
• To reject a call, press and hold the multi-function
button for around 3 seconds.
• A brief second press on the call pick-up button (4)
automatically establishes a connection to the last
number dialled.
6.5 Power-saving
If the Bluetooth ® receiver is not connected to a
Bluetooth ® device, it switches itself off within 10
minutes of not being used in order to protect the
integrated rechargeable battery.
6.6 Activating Siri/Google Assistant
A longer press (approx. 3-4 seconds) on the
call pick-up button (4)
activates the voice assistants Siri or Google Assistant
on your connected smartphone
6.7 Bass amplification
To activate the bass amplification function, press
the button (9). Pressing it again deactivates this
function again.
password
device.
®
receiver,
®
).
®
3