Cleaning And Care - Electrolux Create 3 E3SB1-4ST Bedienungsanleitung

CLEANING AND CARE

Always unplug the appliance before cleaning.
1 Motor Housing. Never immerse the blender base in water! Clean it only with a damp cloth.
Do not use abrasive cleaners, scouring pads or abrasive detergents while cleaning the appliance.
2 Jars * (4,7,10 ), blade sets * ( 3,9 ) and lids * ( 5, 8, 11 ) and measuring cup are dishwasher safe.
If washing by hand, don't use wire brush, steel wool or bleach to avoid rust.
Notes: Always detach the blade sets ( 3,9 ) from jars for cleaning to ensure no leftover food
stuck in between.
WARNING! the blades are very sharp. Handle carefully during cleaning.
* available in certain models only.
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE
You cannot Blender is not connected to
activate or electrical supply.
operate
The bottle and blade assembly are
the blender.
not installed correctly in the blender
base. The safety interlock system
prevents the machine to power on.
There is functional problem.
The blades stalls The motor is overheated.
or machine stops
during operation.
Ingredients are too large.
Wrong ingredients.
( picture page '6 ' )
SOLUTION
Check your home power supply
and replug.
Make sure the blade set is fastened and
the jar is perfectly f itted on the blender
base. (The position symbol on jar base
aligned with lock symbol on blender base)
Contact authorized service centre.
If the motor stalls, turn the blender of f
immediately, unplug the appliance and
let it cool for at least 20 minutes.
Cut all f irm fruits and vegetables into
pieces no large than 1.8cm² to 2.5cm²
or reduce some food.
Glass jar and takeaway bottle intended
use is production of beverages.
Add fruits, vegetables or similar.
Never mix ingredients such as dough,
mashed potatoes, meat or similar.
While grinder intended use is grinding
tough ingredients like nuts, cof fee bean
and dried chili.
HR
CZ
DK
EN
EE
FI
FR
DE
HU
IT
LV
LT
NO
PL
RO
RU
RS
SK
SI
SE
TR
UA