Operation - Klarstein CTR-1 HEAT Bedienungsanleitung

EN
20

OPERATION

Control panel and remote control
Button functions
ON/OFF
SPEED
UP/DOWN
Press the button to start the fan. The preset speed is
MEDIUM and the preset mode is NORMAL.
Press the button to set the desired speed (Low, Mid or
High). Press the button several times in succession to call
up the speed in the following order: MI > HI > LO > MI. As
long as the fan is running, the speed indicator light is on.
Press the button to make the fan flaps swing up and
down. This distributes the cool air better in the room.
The corresponding indicator light will come on. Press the
button again to stop the fan flaps from swinging.