Pepperl+Fuchs ecom Tab-Ex 03 DZ1 Betriebsanleitung Seite 19

If the card is not fixed firmly into the tray, the SIM card may leave or fall out of the tray.
STEP 5 Insert the tray back into the tray slot.
If you insert the tray into your device while
the tray is wet, your device may be damaged.
Always make sure the tray is dry.
• Fully insert the tray into the tray slot to prevent liquid from entering your device.
ΠTighten the two screws (Torx T8) of the tray unit with a torque screwdriver to a torque
of 0.26 Nm.
 Tighten the two screws (Torx T8) of the IP cover with a torque screwdriver to a
torque of 0.26 Nm.

Memory card (microSD card)
Installing a memory card
Your device's memory card capacity may vary from other models and some memory
cards may not be compatible with your device depending on the memory card manu-
facturer and type. To view your device's maximum memory card capacity, refer to the
ECOM website.
• Some memory cards may not be fully compatible with the device.
Using an incompatible card may damage the device or the memory card, or corrupt
the data stored in it.
• Use caution to insert the memory card right-side up.
Œ
19