Charging The Rechargeable Battery - Silvercrest 359294 2010 Montage-, Bedienungs- Und Sicherheitshinweise

Before assembly, check whether
the assembly material provided
is suitable for your circumstances
(e.g. wall condition). If necessary,
consult a professional to procure
suitable mounting material.
Mark the drill holes using the holes in the wall
bracket intended for the screws
5
Now drill the fastening holes in the wall and
put the wall plugs
Mount the wall bracket
included in the delivery (see Fig. B). Ensure that
the wall bracket
5
Hang the main unit
hook on the wall bracket
purpose (see Fig. C).
Charging the rechargeable
battery
Note: Charge the rechargeable battery
(approx. 4 to 5 hours) prior to first use.
Hang up the main unit
aluminium suction tube
charge on the wall bracket
place it out of the reach of children
and pets in a protected location
where no one can trip over or
step on the main unit
aluminium suction tube or the
mains cable.
Insert the connection plug of the mains cable
into the charging socket
battery (see Fig. D).
2
Insert the mains adapter
socket. The LEDs on the rechargeable battery
control display show the charge level of the
2b
rechargeable battery
ing of the rechargeable battery control display").
.
6
into the holes.
7
with the screws
5
is securely tightened.
with the back on the
4
intended for this
5
fully
2
with
4
to
16
5
with
4
on the rechargeable
3
into the mains
8
(see chapter "Mean-
2
Note: During the charging process, the mains
adapter
8
does not indicate that the product is defective.
Remove the mains adapter
socket and the mains cable connector plug
from the charging socket
able battery
the rechargeable battery control display
out.
Charging the rechargeable battery out-
side of the main unit:
Charge the rechargeable battery
6
in a protected location and
2
outside the reach of children
and pets.
You can remove the rechargeable battery
to charge it outside of the main unit
the release button
battery out of the holder on the handle
2
of the main unit
Insert the mains cable connector plug
the charging socket
battery (see Fig. F).
2
Insert the mains adapter
socket. The LEDs on the rechargeable battery
control display
or
rechargeable battery
ing of the rechargeable battery control display").
Once the rechargeable battery
charged, the LEDs on the rechargeable battery
control display
Remove the mains adapter
socket and the mains cable connector plug
from the charging socket
battery . The LEDs on the rechargeable bat-
2
tery control display
Put the charged rechargeable battery
9
in the main unit
in the handle
locks into place.
may warm up. This is normal and
from the mains
8
when the recharge-
3
is fully charged. The LEDs on
2
and pull the rechargeable
2a
(see Fig. E).
4
of the rechargeable
3
into the mains
8
show the charge level of the
2b
(see chapter "Mean-
2
is fully
2
light up continuously.
2b
from the mains
8
of the rechargeable
3
go out.
2b
by pushing it into the holder
4
of the main unit
1 4
GB/IE/NI/CY
9
go
2b
2
. Press
4
1
into
9
9
back
2
until it
13