Do Not Move Or Raise The Mixer Head With An - Kenwood KAX643ME Bedienungsanleitungen

Do not move or raise the mixer head with an

l
attachment fitted as the Stand Mixer could
become unstable.
Refer to your main Stand Mixer instruction
l
book for additional safety warnings.
This KAX643ME attachment
features the Twist Connection
System and is designed to fit
directly on the latest generation
Kenwood Chef models (identified as
TYPE KVC, KVL, KCC, KWL
and KCL).
This attachment can also fit Kmix
Stand Mixers featuring a slow speed
attachment outlet (TYPE KMX).
To check that this attachment
is compatible with your Stand
Mixer you will need to ensure both
components feature the Twist
Connection System
If your Stand Mixer features the
Bar Connection System
you will also need an adaptor
before operation is possible. The
reference code for the adaptor is
KAT001ME. For more information
and how to order the adaptor visit
www.kenwoodworld.com/twist.
Use the roto food cutter to slice
and shred such foods as carrot,
cucumber, cabbage, apples, potato
and cheese.
before using for the first time
1 Wash the parts: see 'Cleaning'.
key
a pusher
b feed tube and body
c drum retainer
d drums
.
3
to assemble your
roto food cutter
assembly
1 Select a drum. The drums are
numbered at the back and used as
follows:
Drum No 1 - For fine shredding :-
l
chocolate, nuts, carrot and cheese.
Drum No 2 - For coarse
l
shredding :- chocolate, nuts, carrot
and cheese.
Drum No 3 - For thin slicing :-
l
onion, cabbage, cucumber, carrot,
apples, potato and chocolate.
Drum No 4 - For thick slicing :-
l
onion, cabbage, cucumber, carrot,
apples, potato, chocolate and
beetroot.
Drum No 5 (Rasping drum)
l
- For grating parmesan cheese
and potato for German potato
dumplings.
2 Fit the drum into the body of the
roto food cutter.
3 Lock the drum retainer in position
by turning anti-clockwise until the
locating line is directly underneath
the line on the body 1.
to use your
roto food cutter
1 Lift off the slow speed outlet cover
2.
2 With the attachment in the position
shown, locate to the slow speed
outlet and rotate to lock in place 3.
3 Place a collecting vessel beneath
the outlet.