Hama 00176556 Bedienungsanleitung Seite 5

Note: socket installation
• Once the WiFi switch has been added as
described above in the app, it can optionally
also be fitted behind a socket. The socket can
then be conveniently switched on and off via
the app or voice command.
• Please note that, when used behind a socket,
the max. current is reduced to 10 A and the
power to max. 2300 W.
• Once integrated, the app will not lose the WiFi
switch itself in the event of a power cut.
Note: Pairing restart
To restart pairing mode, the WiFi upgrade switch
must first be connected to a switch (e.g. wall
switch). Now switch the upgrade switch ON
and OFF three times quickly. It is now back in
pairing mode.
6.1 Integrating devices into the Hama Smart
Home (Solution) app
• After installation of the WiFi switch (by a
specialist), the connect lamp flashes quickly and
you will hear the relay clicking. If it does not
flash, or flashes slowly, switch the connected light
switch off and on again three times in succession.
• Open the app and sign in.
• Press the "+ in the top right-hand corner to add a
new device.
My Home
5
• Choose Switches from the list.
• Next enter your WiFi password and confirm
with "NEXT".
• Now confirm that the connected lamp is flashing
quickly by ticking "Next step" and then clicking
on "Next".
• Your switch is now connected.
Connecting Now
• Once the connection is successful, the LED stops
flashing quickly and the app confirms that your
switch has been connected. You can now assign it
a different name if you wish.
Added successfully
• Click Finish to end the process.
• You can now attach the switch and configure it.
Done