Werbung
V. Functions
Mode button
The Mode button on the controller corresponds to the
PS button on the Sony PS3 controller. Press this button
for 2 seconds to go to the PS3 XMB window.
Motion sensors
The controller is equipped with Sixmotion technology,
which provides you with motion-sensitive control and
allows you to perform movements in supported games.
Vibration function
The »SCORPAD PRO« controller is equipped with two
internal motors, which function only in games that also
support Force Feedback.
Refer to your game's manual or to the Sony website to
find out if your game supports the vibration function.
If problems persist, check whether vibration support has
been activated in the game's options.
Note: In order to support vibration, the PS3 console's
firmware must be updated to version 2.0.
Sleep mode
To extend the battery's service life and to save energy,
the controller has a sleep mode, which places the
controller in hibernation:
a) after 55 seconds if no receiver is in range
b) after 5 minutes if a receiver is in range but no games
are being played.
To wake the controller out of hibernation, press the
MODE button.
12
Charging function
To charge the controller's battery, connect the supplied
USB cable to the controller and the console. The
controller and console must be switched on for this.
Charging time
Charge the controller for at least 30 minutes – the
battery is fully charged after 2 hours at the most, and the
controller is again ready for use.
Red LED:
• Flashing: Controller is being recharged
• Illuminated: Controller has finished recharging
• Flashing quickly: Not connected to the receiver
• LED illuminated: Connected to the controller and a
controller position (1–4) has been assigned.
Receiver LED:
• Red LED flashing: Not connected to the controller
• Red LED illuminated: Connected
Notes
1. If some buttons do not function in the game, check the
button settings in the option menu. They can generally
be configured there as well. Also refer to the manual of
the game in question.
Werbung
