Statement Of Conformity; Notes And Warnings - Siemens 7XT3300-0 Serie Handbuch

English

Statement of Conformity

This product complies with the directive of the Council of the European Communities on the
approximation of the laws of the Member States relating to electromagnetic compatibility
(EMC Council Directive 2004/108/EC - valid until April 19th, EMC Council Directive
2014/30/EU - valid as of April 19th) and concerning electrical equipment for use within
specified voltage limits (Lowvoltage Directive 2006/95/EC - valid until April 19th, 2016;
Lowvoltage Directive 2014/35/EU - valid as of April 20th, 2016).
This conformity has been proved by tests performed according to the Council Directive in
agreement with the generic standards EN 61000-6-2 and EN 61000-6-4 (for EMC directive)
and with the standards EN 60255-6 (for low-voltage directive) by Siemens AG.
The device is designed and manufactured for application in industrial environment.
The product conforms with the international standards of IEC 60255 and the German
standards VDE 0435.

Notes and Warnings

The warnings and notes contained in this booklet serve for your own safety and for an
appropriate lifetime of the device. Please observe them!
The following terms are used:
28
DANGER
Danger means that death or severe injury will occur if the appropriate
safety measures are not taken.
 Follow all advice instructions to prevent death or severe injury.
WARNING
Warning means that death or severe injury can occur if the appropriate
safety measures are not taken.

Follow all advice instructions to prevent death or severe injury.
7XT3300-0*A00
C53000-B1174-C129-8