3. Package contents
1x smart fan
1x remote control
4x screws
1x quick start guide
2 x stand halves
1 x cable holder
4. Installation
• The fan's stand comprises two parts which fit around the main base. The two parts are easy to assemble.
1
2
• Clamp the back half of the stand into the front half so that it locks into place.
1
• Then fix the stand with the four screws supplied. When doing so, make sure that you guide the cable
2
through the recess on the underside of the fan and do not pinch it. Hand-tighten the screws so that
they do not protrude and the fan does not wobble afterwards or the screws damage the floor.
3
• Attach the cable holder to the back.
3