Toasting Bread Or Toast; Special Function Buttons; Crumb Tray; Cleaning And Storing - Westfalia Laser 2000 80 00 16 Bedienungsanleitung

Toasting Bread or Toast

1. Connect the plug to the power mains. Use the browning rotary switch (4) to
set the desired degree of browning.
2. For less browning select the lowest stage 1 and for high browning the
stage 7.
3. Insert the slices of bread or toast into the toast slots and press the toast
lever (5) down until it locks. Please note that the toast lever engages only if
the plug has been connected to the power mains.
4. The heating element is now switched on. The toasted slices will be
automatically ejected from the slots when they are done. The toaster
switches off automatically.
5. If you only want to toast one slice of bread or toast, lower the browning
level by one point to achieve the same result.

Special Function Buttons

The special function buttons do not work until the toast lever (5) is pressed
down. According to the function, the control lamp lights up.
The STOP Button stops toasting before the preset time.
Defrost Button can toast frozen bread or toast. The toasting process
will be automatically extended. Please note that frozen bread requires
a different toasting time than fresh or dry bread.
Reheat Button briefly reheats bread or toast slices that have already
been toasted.

Crumb Tray

Pull out the crump tray (6) at the bottom of the toaster and remove crumbs in
regular intervals.

Cleaning and Storing

Before cleaning, pull the power plug and allow the unit to cool down!
Use only a lightly moistened cloth to clean the housing. Do not use
aggressive chemicals or similar materials and avoid using metal or sharp
items to clean the unit, because they may damage the surfaces.
Protect the unit from dust and dirt and store it out of reach of children.
All manuals and user guides at all-guides.com
Operation
8