Additional Information; Charge Your Usb Device; Reset The System; Replace The Fuse - Philips CE233/13 Bedienungsanleitung

9 Additional
information

Charge your USB device

You can charge your USB device, for example,
smart phone, with this product.
Note
•
The output voltage through the USB socket is 5 V with
output current 1.0 A.
Connect your USB device to this product with
USB cable. Once the USB device is connected
and recognized, it begins to charge automatically.

Reset the system

If the system works abnormally, reset the
system to factory default settings.
1
Detach the front panel.
2
Press the RESET button with the tip of a
ball-point pen or toothpick.
» All settings are reset to factory default.

Replace the fuse

If there is no power, check the fuse and replace
it if it is damaged.
1
Check the electric connection.
2
Remove the damaged fuse from the rear
panel.
3
Insert a new fuse with the same
specifications (15 A).
L
REAR
R
Note
•
If the fuse gets damaged immediately after it is
replaced, an internal malfunction may occur. In such
case, consult your local retailer.
EN
17