Modules With Holder Rack - Miele APLW 511 Gebrauchsanweisung

Modules with
holder rack
 Risk of damage.
The holders on the holder rack can break off if they bang against
the struts on the bar of the mobile unit.
Inserting modules:
Do not lower the module until the holders are located behind the
struts on the mobile unit.
Removing modules:
Lift the module until the holders are located above the struts on the
mobile unit.
In the bottom and middle levels of the mobile unit, insert the mod-
ules in the two outer positions first so that they can be pushed be-
hind the bars on the side of the mobile unit. Then insert the module
in the middle position.
en - Areas of application
37