Inserting Modules; Removing Modules - Miele APLW 511 Gebrauchsanweisung

en - Areas of application

Inserting modules

Removing mod-
ules
36
Attach the back end of the module to the support and push to-

wards the water connection.
Plug the module connector into the water connection of the mobile

unit at a flat angle.
Then push the module retainer slightly towards the water inlet 

and lower the module  to lock it in place behind the struts of the
mobile unit.
Push the module retainer slightly towards the water inlet  and pull

it out from behind the struts of the mobile unit .
Disconnect the module from the water connection on the mobile

unit and remove it.