Herunterladen Inhalt Inhalt Diese Seite drucken

Hints On Trimming Hedges - Westfalia WT02220 Bedienungsanleitung

18 v li-ionen heckenschere
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Operating
1. Remove the blade protection (7) and insert the battery into the battery carrier
(5). Do not apply force when inserting the battery. Iserting can be achieveed
easily and without resistance. The battery fits only in one position into the
machine. To remove the battery, press the releasing button (6) and pull the
battery out.
2. To switch on the hedge trimmer, first press the safety switch on the auxiliary
handle (3) and than press the ON/OFF switch (4) inwards. To switch off the
trimmer, release both switches.
3. Use less pressure when trimming. Do not force the hedge trimmer while
trimming. Use common sense while working.
4. With a fully charged battery you can operate the hedge trimmer for approx. 30
Minutes. If the hedge trimmer stops while cutting, the battery is discharged.
We recommend ordering a second battery under the article no. 18 00 18 so
you will be able to operate the hedge trimmer continuously.
5. Before cutting bushes, scrubs or hedges, remove thick branches or similar
material. Make sure that there are no small animals hidden in the bushes or
hedges.
6. There are different cutting techniques and certain seasons to be observed
when trimming hedges or bushes. For detailed information see appropriate
technical literature.
Please note the local rest periods when working with the hedge trimmer in
order to avoid disturbances.
7. Switch off the hedge trimmer after work and remove the battery to avoid
injuries.
Do not carry the hedge trimmer with your fingers on the safety switch and the
ON/OFF switch. Always fit the blade protection when carrying or storing the
hedge trimmer.

Hints on trimming hedges

If a hedge has to be cut back very substantially, trim the
hedge in two passes.
First cut the hedge to the desired height and stretch a string
along the hedge at the desired height. Guide the blades of the
hedge trimmer at an angle of 10 – 15° to the hedge in order to
get a straight cut.
All manuals and user guides at all-guides.com
Operating
10
correct

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

17 98 61

Inhaltsverzeichnis