Inhaltsverzeichnis
Werbung
Warning: When clamping workpieces up to the maximum clamping range, the
workpiece must rest on the moving jaw and remain parallel.
Ensure sufficient stability when working with long or large workpieces. The two
front legs are provided with holes with which the front legs can be attached to
the ground by means of screws or clamps for better stability.
Tips:
— Use a soft material between the workpiece and the jaws if necessary to
prevent damage to the workpiece.
— Do not apply too much pressure on the workpiece.
— Ensure that the workpiece is in balance.
Cleaning and maintenance
Check the product for damage over worn parts before each use. Do not use the
device if there are damaged or worn parts. Contact your supplier or
manufacturer for spare parts.
Storage
Store the work bench and the accessories in a dry and frost-free place.
Technical data
Max. weight:
Footprint (standing):
Dimensions (folded):
Working height:
Jaw size:
Clamping range:
Clamping force:
Product weight without accessories: 19 kg
Accessories – optionally available
Extension Bar
Log- and Pole Jaws Art. 81 23 97
Standard Support Art. 81 23 93
Roller Support
Tool Tray
Pipe Jaws
Art. 81 23 91
Art. 81 23 94
Art. 81 23 95
Art. 82 32 65
150 kg
101 x 106 x 87.5 cm
79.7 x 30 x 32.5 cm
87.5 cm
20.5 x 8 cm
0 – 956 mm
1000 kg
17
Werbung
Inhaltsverzeichnis
