Lubrication; Oiler Setting; Suggested Components For Safe Operation - Westfalia ZK-2203 Bedienungsanleitung

Do not allow liquids to enter the unit and never immerse it into liquids. Water
in the compressed air inlet can damage the machine. Therefore it is recom-
mended to drain the air lines and the compressor regularly! The air filters
should be cleaned at least once a week.

Lubrication

Pneumatic tools have to be lubricated always sufficiently. This is done
continuously and safest by using an oil-fog lubricator. If the oiler is mounted
centrally at the compressor or mounted firmly at the end of the compressed-air
pipe installation, use only a hose with a length of max. 10 m. If the hose is longer,
the nebulisation disappears in the air. The oil floats inside the hose and does not
arrive at the air tool.

Oiler Setting:

Hose up to 5 m
Hose up to 10 m
If you do not have an oiler at yours disposal, please put a few drops of oil into the
compressed-air connection before every machine usage. Lubricate the pneumatic
grinder once more after use, especially if you do not operate the unit for a long
time. Further maintenance work is not necessary.

Suggested Components for safe Operation

1.
1. Pneumatic Grinder
2. Quick Coupling Adaptor
3. Pneumatic Pipe with Quick Couplers at both sides
4. Quick Coupling Adaptor
5. Quick Coupling
6. Valve
7. Oil-fog Lubricator
8. Pressure Regulator
9. Filter Unit
10. Air Source (Compressor)
All manuals and user guides at all-guides.com
Operation
every 2 min.
always per min.
2.
3.
1 drop
1 drop
7.
5.
4.
6.
10
9.
8.
10.