Blaupunkt 5C90S8990 Bedienungsanleitung Seite 42

3) Tap or or move the Smart Slider
temperature sensor.
4) Press to start the program. When the core temperature of the food reaches the target
temperature of the temperature sensor, a signal will sound five times and the cooking process
will be stopped.
19. Temperature sensor functions
(1) Insert the temperature sensor into the food. When the temperature sensor has reached the
target temperature, the temperature setting is finished.
(2) In this mode, the operating modes hot air, dual grill, top/bottom heat, dual grill + circulation and
infrared grill are available.
Hot air
Operating
200 C°
mode
Temperature
50 °C – 100 C° 50 °C – 100 C° 50 °C – 100 C° 50 °C – 100 C° 50 °C – 100 C°
selection
Default
temperature
NOTE:
1) Insert the temperature sensor into the food in standby mode. "Prob" will appear on the display.
2) Press . When the temperature sensor has reached the target temperature, "Prob" will
appear on the display. The process will stop and a signal will sound five times. Pull out the
temperature sensor. The appliance will return to standby mode or to the clock.
3) The setting range of the temperature sensor is 50-100°C. The temperature in the centre of the
oven is 200°C.
4) The cooking time cannot be set with this function.
5) The tone will sound once when you insert or remove the temperature sensor.
6) When the appliance is in the setting and operation mode, this mode is ended by inserting or
removing the temperature sensor.
7) f the temperature has not been set, the signal will sound five times after 9 hours. The process
will be cancelled.
8) Dual grill + circulation function, 50-100 °C: If the target temperature is not reached, the dual
grill will operate for 20 seconds and stop for 10 seconds.
9) The function can be changed or cancelled.
Dual grill
200 C°
60 °C 60 °C
to set the target temperature of the
Dual grill Top/bottom
+ circulation
200 C°
60 °C
19
Infrared grill
heat
200 C° 200 C°
60 °C 60 °C