Settings
6.5.7 Order/result interface
Vivatmo pro can receive measurement orders from and send results to an electronic patient record system (EPR), if the network
is configured. The interface standards GDT (German Data Transfer) and HL7 are supported.
To configure the interface to your patient management system follow the installation wizzard:
Order/Result Interface
Select Setup
Order/Result Interface
Protocol
Credentials
60
© Bosch Healthcare Solutions GmbH
1. On the Administration screen, select Network/Interface.
2. On the Network and Interface screen, select Order/Result Interface.
You can select:
active
Configure Interface to change the settings.
•
GDT
Show Interface Configuration to display the current settings.
•
yes
Select Configure Interface to change settings.
D o n e
3. Activate the Order/Result Interface. The system keeps the interface
settings when de-activated.
4. Select the Arrow Right button to move to the next screen.
Select the desired protocol standard: HL7 or GDT.
5. Select Yes for Credentials when the Order/Result Interface is access
controlled by user name and password.
Instructions for use