Mounting The Unit In The Dashboard; Fuse Replacement; Detaching And Attaching The Front Panel - Sony CDX-3201DAB Bedienungsanleitung

Mounting the unit in the
dashboard
Before installing, make sure the catches on
both sides of the bracket  are bent
inwards 2 mm ( 3 /
32
1 Position the bracket  inside the
dashboard, then bend the claws
outward for a tight fit.
53 mm (2

2 Mount the unit onto the bracket ,
then attach the protection collar .

Notes
• If the catches are straight or bent outwards, the
unit will not be installed securely and may spring
out.
• Make sure the 4 catches on the protection collar
 are properly engaged in the slots of the unit.
Detaching and attaching the front
panel
For details, see "Detaching the Front Panel"
(page 5).
Resetting the unit
For details, see "Resetting the Unit" (page 5).
in).
1
182 mm (7 /
1
/ in)
8
Catch




Fuse replacement

When replacing the fuse,
be sure to use one
matching the amperage
rating stated on the
original fuse. If the fuse
blows, check the power
connection and replace the
fuse. If the fuse blows again after
replacement, there may be an internal
in)
4
malfunction. In such a case, consult your
nearest Sony dealer.
Attaching the DAB antenna
(aerial)
Sony recommends attaching the DAB
antenna (aerial) to the position
windshield. Do not attach the DAB antenna
(aerial) above heater wires, in a location
which would obstruct the view of the driver,
or in a location that would receive
interference from metal.
* Not supplied for CDX-3200DAB.
For your safety
Do not run cables so that they interfere with
operation of the vehicle, or through a
location that would interfere with the
function of the airbags.
DAB antenna (aerial) *
Fuse (10 A)
on the
27
GB