Bosch Rexroth PSG 6160.00 TS23 Serie Typspezifische Anleitung Seite 20

20/32 Bosch Rexroth AG | Electric Drives and Controls
To this Documentation
1.3.1 Safety instructions
The Safety instructions please look in Tab. 1: Required and supplementary
documentation.
1.3.2 Symbols
The following symbols mark notes that are not safety-relevant but increase the
understanding of the documentation.
Meaning of the Symbols
Tab. 2:
Symbol Meaning
If this information is disregarded, the product cannot be
used and or operated to the optimum extent.
Single, independent step

1. Numbered step:
2. The numbers specify that the Steps are completed one
after the other.
3.
1.3.3 Designations
This documentation uses the following designations:
Tab.3: Designation
Tab. 3:
Designation Meaning
BOS 6000 Bedienoberfläche Schweißen (Welding Software)
PSG xxxx
Medium-Frequency Welding Transformer 1000Hz
TS
Temperature, Sensor
1.3.4 Abbrevations
The in this documentation used abbrevations please look in Tab. 1: Required and
supplementary documentation Rexroth PSG 6xxx Medium-Frequency Welding
Transformer.
PSG 6160.00 TS23x | R911172347