Installing The Product On A Rack Etc; Preparing The Cables - Pioneer PDK-LS01 Bedienungsanleitung

Installing the Product on a Rack etc.

Caution
When installing on a rack etc., please be
sure that the plasma television is held by
two or more people.
Please do not hold the plasma television
by the speakers or stand. Doing so may
damage the product.
The load bearing capacity of the glass
shelf is 10 kg. Do not place any object
heavier than 10 kg on it.
Do not apply excess load on the glass
shelf by, for example, climbing on it or
placing your hands on it. If you do, you
might break it, knock it over, or cause
another unexpected accident.
Do not hold the glass shelf to move it. If
you do, you might break it, knock it
over, or cause another unexpected
accident.
Do not attach or remove a plasma
television with any equipment or object
placed on the glass shelf.

Preparing the Cables

Use the enclosed cable clamp to bind the cables.
Note
Be very careful not to apply force to the bases of the cables.
Cable clamp
Hold the plasma
television by its
handles and from
the top.
When the side speakers are
installed
Do not hold the
plasma television
and the stand by the
speakers.
When the side speakers are
installed
7
En