Inhaltsverzeichnis; Cautions; Important Notice - Pioneer PDK-LS01 Bedienungsanleitung

Thank you for buying Pioneer's product.
Please read through the Operating Instructions to
learn how to operate your model safely and
properly.
Please be advised to keep the Operating
Instructions in your place for future reference.
Installation
• Consult your dealer if you encounter any
difficulties with this installation.
• Pioneer is not liable for any damage resulting
from improper installation, improper use,
modification, or natural disasters.

IMPORTANT NOTICE

Record the model number and serial number
of this equipment below.
Model No.
Keep these numbers for future use.
Contents
Cautions ............................................................. 2
Checking the Standard Accessories ................. 3
Specifications ..................................................... 3
Assembling the Stand ....................................... 4
Attaching the Plasma Television ..................... 5
Installing the Product on a Rack etc. ............... 7
Preparing the Cables ........................................ 7
Preventing Equipment from Falling Over ...... 8
This symbol refers to a hazard or unsafe
practice which can result in personal injury
or property damage.
2
En
Serial No.
CAUTION

Cautions

This product is a table top stand exclusively
designed for plasma televisions (PDP-LX508D /
PDP-LX5080D / PDP-5080XA / PDP-5080XD / PDP-
508XD /PDP-SX5080D / PDP-4280XA / PDP-4280XD
/ PDP-428XD / PDP-SX4280D) from Pioneer.
Use with other model is capable of resulting in
instability causing possible injury. For further
information, please contact the store where you
purchased your display.
Do not install or modify the product other than
specified.
Do not use this stand for a Plasma television other
than those designated and do not modify it or use it
for other purposes.
• Do not scratch or strike the glass.
• Do not use it if the glass is cracked or broken.
If you use it in that condition, it might fall over
and break, causing an injury.
Installation Location
• Select a location that is strong enough to support
the weight of the stand and the displays.
• Make sure to place it in a level and stable location.
• Do not install it outdoors, at a hot spring, or near
a beach.
• Do not install the stand where it may be subjected
to vibration or shock.
Assembling and Installation
• Assemble the stand in accordance with the
assembly instructions and securely attach all
screws at the designated locations.
There have been cases where unforeseen
accidents such as the equipment breaking or
falling over occurred after the installation of
the display because the stand was not installed
as instructed.
• The display must always be installed by two
or more people to assure it is installed safely.
• Before installation, turn off the power for the
display and peripheral devices then remove
the power cord plug from the power outlet.
• When installing and assembling the stand, be
careful not to apply a load on the glass.
Prevent accidents caused by the product falling
over by taking reliable measures to prevent it
from falling over (see Page 8).