Programming Vehicle Functions - Faller 163701 Bedienungsanleitung

Programming vehicle functions

10. Programming vehicle functions
The decoder within the vehicle can be programmed using a DCC capable
digital control unit via so-called configuration variables (called CVs in the
following).
NOTICE
EN
Property damage will result from wrong settings or erroneous pro-
gramming
Charging station and vehicle might no longer function properly or be
destroyed.
Only programme if you have a working knowledge of programming.
X
Follow the directions given in the instruction manual of the digital
X
control unit.
PREREQUISITE: a DCC capable digital control unit is available. The charging
station has been connected to the digital control unit.
Connect the "digital control unit" ports of the charging station to the
X
programming line port of the digital control unit.
Switch the vehicle off.
X
Connect the vehicle to the charging station.
X
Switch the vehicle on.
X
NOTE: For further information on the way of connecting a digital vehicle
to the charging station, please refer to the instruction manual "Processor-
controlled charging unit".
136