Siemens SIMATIC IFP2200 Produktinformation Seite 18

Features
• Reinforced front in a frameless design
• Multi-touch technology; detection of up to 5 fingers simultaneously
• Scratch-proof, chemical-resistant and anti-glare glass front
• Intelligent operation fault recognition, e.g. palm, drops, dirt on the touch screen.
• Operation possible with thin working gloves
• LCD display, resolution 1920 x 1080 pixels
• 16 million colors
• 24 V DC power supply
Interfaces
IFP Extended versions
① Connection for functional ground
② X80 connector for 24 V DC power supply
③ X70 DisplayPort interface
ITC built-in units
① Functional grounding connection
② X80 power supply connector
③ "Factory settings" button
Safety instructions and further information
The general safety instructions in the underlying operating instructions apply, see section "Validity (Page 17)".
Intended use
NOTICE
Device protection is impaired
If the device is not used as intended, the degrees of protection assured for the device cannot be guaranteed and the
protection objectives cannot be fulfilled.
• Use the device as described in the documentation.
• Observe all notes and requirements.
18
④ X71 Ext link interface to the Transceiver Unit
⑤ X61/X62 USB Type A
⑥ X60 USB Type B
④ X1 P1 PROFINET (LAN), 10/100/1000 MBit
⑤ X1 P2 LAN, 10/100/1000 MBit
⑥ X61 ... X64 USB Type A
SIMATIC IFP2200/2400 ITC2200/2400 frameless
A5E48015893-AC, 03/2021