Appendix - Pioneer PDP-42RXE Benutzerhandbuch

2 Appendix

Specifications
Appendix
Item
Number of Pixels
Audio Amplifier
oubleshooting
Surround System
Power Requirement
oblem
No power.
Dimensions (with stand)
Weight (with stand)
Colour System
TV Function
No picture or sound
Terminals
Normal picture but no sound
No picture or black and white
icture
ound and picture interference
lurred or snowy picture, distorted
ound
emote control malfunctions
OSD
• Design and specifications are subject to change without notice.
Downloaded From TV-Manual.com Manuals
Possible Solution
• Make sure the Plasma Display is connected correctly. (See page 17 .)
• Is the power cord disconnected? (See page 17 .)
• Has the power been turned on? (See page 18.)
• Check if you have pressed
If the STANDBY indicator on the Plasma Display lights up red, press .
Receiving System
• Check if the power cord is connected correctly.
• Check if you have pressed the
Tuner VHF/UHF
of the Plasma Display.
• Select an input source responding to that particular source. CATV
• Check the picture contrast and brightness settings.
STEREO
• Check the volume.
Rear ANTENNA
• Check the volume.
• Check whether the AV1 button on the remote control has been pressed.
• Adjust the colour settings.
AV2
• Check if the correct broadcast system is selected.
AV3
• Try to identify the electrical appliance that affects the Plasma Display, then move it further away.
* AV2 out: User selectable
• Plug the power cord of the Plasma Display into a different wall outlet.
COMPONENT
• Check the direction, location and connections of your aerial. Such interference often occurs due to
the use of an indoor aerial.
HDMI
• Press the INPUT button to select the Plasma Display or an external device.
RS-232C
• Replace the batteries in the remote control.
Side VIDEO
• Install batteries ensuring that the <+> and < – > ends of the batteries are inserted correctly.
• Check the angle and distance of the remote control to the Plasma Display. Make sure there are no
obstacles between the remote control and the Plasma Display.
• Check if the correct function button has been pressed.
• Change the location of light sources or the direction of the Plasma Display to avoid glare.
• Is the Teletext function activated? (See page 38)
42" Plasma Display, Model: PDP-42RXE
1024 768 pixels
10 W + 10 W (1 kHz, 1 %, 4 )
SRS TruSurround XT
220-240 V AC, 50/60 Hz, 300 W
(2.5 W Standby)
1235 (W) 699 (H) 252 (D) mm
40 kg (88.2 lbs.)
on the remote control unit. (See page 18.)
PAL/SECAM
B/G, D/K, I, L/L'
on the remote control or the STANDBY/ON button on the bottom
E2–E69ch, F2–F10ch, I21–I69ch, IR A–IR Jch
Hyper-band, S1–S41ch
NICAM/A2
75 DIN Type for VHF/UHF/CATV in
SCART (AV in, S-VIDEO in, TV out)
SCART (AV in/out, RGB in)*
SCART (AV in/out, RGB in)
COMPONENT VIDEO in, AUDIO in
HDMI in, AUDIO in
Service only
S-VIDEO in, VIDEO in, AUDIO in
English/German/Italian/Spanish/French/Dutch/Swedish/Russian/Turkish
12
En