Tuner Setup; Setting The Current Date And Time; Setting Up Tv Channels - Pioneer PDP-42RXE Benutzerhandbuch

8 Tuner Setup

Setting the Current Date and Time

Tuner Setup

You can set the current date and time so that the current time is
displayed when pressing the
1
Press the MENU button.
2 Press the c or d button to move to System, then press
etting up TV channels
the \ or OK button.
s section describes how to search and set up TV channels
t you can watch under the current conditions. Unless you set System
Menu Language
TV channels using Scan Channels, you may not be able to
TTX Language
Clock Setting
e in any channels.
anning Channels Automatically
can automatically scan channels for the frequency ranges
Move
ilable.
3
Press the c or d button to move to Clock Setting, then
Press the MENU button.
press the \ or OK button again.
Press the c or d button to move to Tuner Setup, then
press the \ or OK button.
Clock Setting
Date
Time
Tuner Setup
On Timer
Scan Channels
Off Timer
Scan Analog Channel
Auto Power Off
Edit Channel List
Sleep Timer
Adjust
4
Select Date and press the \ or OK button.
Move Enter Return
5
Press the [ or \ button to move to Day, Mon (month)
Select Scan Channels and press the \ or OK button.
and Year, then set them by pressing the c or d button.
Select Country and press the \ or OK button.
6
When you have finished, press the OK button.
Press the c or d button to select the desired country or
7 Press the c or d button to move to Time, then press the
area, then press the [ or BACK button.
\ or OK button.
• You can select from 22 countries or areas; Austria,
Belgium, Denmark, Finland, France, Germany, Greece,
Clock Setting
Date
Ireland, Italy, Luxembourg, Netherlands, Norway,
Time
Poland, Portugal, Russia, Spain, Sweden, Switzerland,
On Timer
Off Timer
Turkey, UK, East Europe and West Europe.
Auto Power Off
Sleep Timer
Move to Start by pressing the c or d button and start the
search by pressing the \ or OK button.
Scan Channels
Adjust
Analog Channel
Now Searching
8 Press the [ or \ button to move to Hour/Min, set them
by pressing the c or d button, then press the OK button.
9
Press the EXIT button.
30%
Analog Channels 0
Cancel
The scan starts. The scanned channels are automatically
stored in order. To stop scanning, press the BACK button.
When finished scanning, press the EXIT button.
When using the Cable Converter, you may need to manually add
able Converter output channels.
anning Analogue Channels Manually
can choose if you want to store the channels.
Press the MENU button.
Press the c or d button to move to Tuner Setup, then
press the \ or OK button.
Downloaded From TV-Manual.com Manuals
button to display information.
English
West Europe
Enter Return
05/OCT/2005
09 : 30 am
00 : 00 am
00 : 00 am
Off
Off
Move Return
05/OCT/2005
09 : 30 am
00 : 00 am
00 : 00 am
Off
Off
Move Return
3
Press the c or d button to move to Scan Analog
Channel, then press the \ or OK button.
Tuner Setup
Scan Channels
Scan Analog Channel
Edit Channel List
Move Enter
4 Select Colour System and press the \ or OK button.
5 Press the c or d button to select the desired colour
system (Auto, PAL or SECAM), then press the [ or
BACK button.
6
Press the c or d button to select Audio System, then
press the \ or OK button.
7 Press the c or d button to select the desired audio
system (BG, I, DK, L or L'), then press the [ or BACK
button.
8
Press thec or d button to select Band, then press the \
or OK button.
9
Press the c or d button to select the desired band (VHF/
UHF or Cable), then press the [ or BACK button.
10 Move to Channel by pressing the c or d button and
select the channel number by pressing the [ or \
button. Or move to Search by pressing the c or d button
and search the channel by pressing [ or \ button.
Scan Analog Channel
Colour System
Audio System
Band VHF/UHF
Channel
Programme No
Name Channel
Search
Fine Tune
Store
Move Adjust
11
Press the c or d button to move to Programme No and
select the programme by pressing [, \ or 0 to 9 buttons.
12 Press the c or d button to move to Store, then press the
\ or OK button.
• You can receive the selected channel.
13
If you want to edit the channel name, press the c or d
button to move to Name Channel, then press the \ or
OK button.
Scan Analog Channel
Colour System
Audio System
Band VHF/UHF
Channel
Programme No
Name Channel
Search
Fine Tune
Store
Move Enter
14 Press the c or d button to select a letter (A~Z, a~z), a
number (0~9) or a symbol (space, {I}~! "#$%& '()*+,-./:;
<=>?@[\]^_`). Move to the previous or next letter by
pressing the [ or \ button.
15
When you have finished entering the channel name, press
the OK button.
Return
Auto
BG
2
1
Return
Auto
BG
2
1
Return
08
En