Inhaltsverzeichnis
Werbung
Before first Use
Unpack the torque wrench and check it for any damage in transit.
Dispose of packaging materials or store them out of reach of
children. Plastic bags etc. may become a deadly toy for children!
Setting the Target Torque Value
1. Press the turnknob (6) forward against the handle.
2. Turn the turnknob (6) clockwise or counter clockwise to set the
desired torque value. The value can be read from the window (5).
3. Pull the turnknob back out to lock it in place.
After use, set the wrench to the lowest torque.
Use as Torque Lug Wrench
Press the locking button (3) on the
socket holder (2) and push the
socket holder onto the lever (1).
Lock it in place at the end of the
lever. Make sure the parts are
correctly aligned (see Picture).
Attach the required ½ inch socket to
the socket holder and tighten the lug
nut as shown in the picture. When
the preset torque is reached the
torque wrench will release with an
audible click. Do not tighten the nut
any further.
Attention: Please keep in mind that
an overtightened nut will not be
detected by using a torque wrench.
If, for instance, lug nuts have been tightened with an impact driver
and the torque wrench immediately clicks upon tightening, it is still
possible that the lug nuts have been overtightened.
Operation
8
Werbung
Inhaltsverzeichnis
