Hinweis ist eine wichtige Information über das Produkt, die Handhabung des Pro- duktes oder den jeweiligen Teil der Dokumentation, auf den besonders aufmerksam gemacht werden soll und deren Beachtung wegen eines mög- lichen Nutzens empfohlen wird. Betriebsanleitung (kompakt) PS791-1PRO A5E00288912-05...
Hinweis Die genaue Produktbezeichnung und Bestellnummer entnehmen Sie bitte dem Aufdruck auf der Verpackung oder auf dem Gerät. Lieferumfang Folgende Teile gehören zum Lieferumfang des PS791-1PRO: • PS791-1PRO (Bestell-Nr. 6GK5791-1PS00-0AA6) • 4-polige Kabeldose zur Netzspannungsversorgung • M12 Power Cord • Betriebsanleitung (kompakt)
Lieferung oder bei äußeren Beschädigungen mit Ihrem Liefe- ranten oder der örtlichen Siemens-Geschäftsstelle in Verbindung. Gerätebeschreibung Das Gehäuse des PS791-1PRO mit der Schutzart IP65 ist für Schraub- montage an Wänden bzw. für die Montage auf S7-300-Profilschiene vorge- sehen. 7 9 1 - 1 P S 0 0 - 0 A A 6 S 1 P o w e r L 1 D C 2 4 V 0 .
Die Montage auf einer Standard-Hutschiene ist mit dem auf der Gehäuse- rückseite angebrachten Schieber ebenfalls möglich. Das PS791-1PRO kann außerdem mit 4 Schrauben M4x80 (nicht im Lie- ferumfang enthalten) von unten an das Gehäuse eines SCALANCE W788 / SCALANCE W744 oder SCALANCE X208PRO montiert werden.
Seite 7
Kabeldose besteht Lebensgefahr durch Netzspannung, wenn das PS791-1PRO Spritzwasser oder Feuch- tigkeit ausgesetzt ist! Nehmen Sie das Netzteil PS791-1PRO nur in Betrieb, wenn folgende Vor- aussetzungen erfüllt sind: • Verwenden Sie nur solche Netzkabel, die über eine abgedichtete Ver- bindung zur Kabeldose verfügen.
Seite 8
Führen Sie folgende Schritte durch, um die Kabeldose an ein Netzkabel anzuschließen. 1. Schrauben Sie die Dosenhülse von der Buchse ab. Öffnen Sie die Schelle der Zugentlastung. 2. Entfernen Sie die Kabeldurchführungsschraube einschließlich Dichtung von der Dosenhülse. Betriebsanleitung (kompakt) PS791-1PRO A5E00288912-05...
Seite 9
Absatz aufliegt. 9. Drehen Sie die Kabeldurchführungsschraube so weit in die Dosenhülse ein, bis Sie sicherstellen können, dass die gepresste Dichtung das Netzkabel fest umschließt. Dadurch soll das Eindringen von Feuchtig- keit und Spritzwasser verhindert werden. Betriebsanleitung (kompakt) PS791-1PRO A5E00288912-05...
Deutsch Technische Daten Pinbelegung des PS791-1PRO Buchse X1 Pin 1 Pin 2 Pin 3 Buchse X2 Pin 1 24 V DC Pin 2 Pin 3 Masse Pin 4 Technische Daten der Kabeldose Abmessungen (Länge, Durchmesser) 76 mm x 29 mm Schutzart Gehäuse...
Seite 11
Deutsch Technische Daten des PS791-1PRO Abmessungen (Breite x Höhe x Tiefe) 125 x 60 x 130 mm Gewicht 750 g Netzeingang 90 – 265 V AC, 47 – 63 Hz Nennleistung Wirkungsgrad typisch 80 % Netzausfallüberbrückung > 20 ms bei U...
Die obigen SIMATIC NET-Produkte erfüllen die Anforderungen der Richtli- nie 2004/108/EG “Elektromagnetische Verträglichkeit”. Die EU-Konformitätserklärungen werden gemäß genannten EU-Richtlinien für die zuständigen Behörden zur Verfügung gehalten bei: Siemens AG Automation and Drives Industrial Communication SIMATIC NET Postfach 4848 D-90327 Nürnberg Betriebsanleitung (kompakt) PS791-1PRO A5E00288912-05...
Seite 13
Deutsch Maßbild 791-1PS00-0AA6 S1 Power L1 DC 24V NEC CLASS 2 OUTPUT 50 ... 60 Hz SIEMENS PS 791-1PRO AC 110...230V Betriebsanleitung (kompakt) PS791-1PRO A5E00288912-05...
Seite 14
Note highlights important information on the product, using the product, or part of the documentation that is of particular importance and that will be of benefit to the user. Operating Instructions (Compact) PS791-1PRO A5E00288912-05...
Seite 15
The exact name of the product and the order number can be found printed on the packing or on the device itself. Components of the Product The following components are supplied with the PS791-1PRO: • PS791-1PRO (Order no. 6GK5791-1PS00-0AA6) • 4-pin cable socket for line voltage •...
Seite 16
Siemens office. Description of the Device The housing of the PS791-1PRO has the IP65 degree of protection and is intended for wall mounting with screws or for mounting on an S7-300 stan- dard rail.
English Caution The rated power of the PS791-1PRO is 9 W. Higher power consumption causes a thermal overload of the device that can cause damage or de- struction of the PS791-1PRO. Installation and Commissioning Wall-mounted,S7-300 Standard Rail or DIN Rail To install the PS791-1PRO on a wall, you require four M4 screws.
PS791-1PRO is subjected to sprayed water or dampness! Put the PS791-1PRO power supply unit into operation only when the fol- lowing conditions are met: •...
Seite 19
Follow the steps below to connect the cable socket to a power supply ca- ble. 1. Unscrew the socket sleeve from the socket. Open the strain relief clamp. 2. Remove the cable bushing screw along with the seal from the socket sleeve. Operating Instructions (Compact) PS791-1PRO A5E00288912-05...
Seite 20
9. Screw the cable bushing into the socket sleeve until you are sure that the seal is pressed in to surround the cable firmly. This is in- tended to prevent dampness and sprayed water entering the con- nector. Operating Instructions (Compact) PS791-1PRO A5E00288912-05...
English Technical Specifications Pin Assignment of the PS791-1PRO X1 Socket Pin 1 Pin 2 Pin 3 X2 Socket Pin 1 24 V DC Pin 2 Pin 3 Ground Pin 4 Technical Specifications of the Cable Socket Dimensions (length, diameter) 76 mm x 29 mm...
Seite 22
English Technical Specifications of the PS791-1PRO Dimensions (width x height x depth) 125 x 60 x 130 mm Weight 750 g Power supply input 90 – 265 V AC, 47 – 63 Hz Rated power Typical efficiency Power supply buffering >...
The EU conformity certificates are available for the relevant authorities ac- cording to the EU directive and are kept at the following address: Siemens AG Automation and Drives Industrial Communication SIMATIC NET Postfach 4848 D-90327 Nuernberg, Germany Operating Instructions (Compact) PS791-1PRO A5E00288912-05...
English Dimensional drawing 791-1PS00-0AA6 S1 Power L1 DC 24V NEC CLASS 2 OUTPUT 50 ... 60 Hz SIEMENS PS 791-1PRO AC 110...230V Operating Instructions (Compact) PS791-1PRO A5E00288912-05...