Care And Cleaning - Kenwood CG600-Serie Bedienungsanleitung

Downloaded from www.Manualslib.com
G Whenever the appliance is switched
on with the collecting vessel in
position, the light for 2 cups of
coffee will glow. To select more
cups, press the + button. Each time
the button is pressed, coffee for an
additional cup is selected. To
reduce the number, press the –
button. When one light glows,
coffee for the corresponding number
of cups indicated will be milled. If
two lights glow for example below 4
and 6 then this indicates coffee for 5
cups will be ground.
7 Once the desired number of cups
has been selected, press the
'Start/Stop' button.
important
G The appliance is fitted with
safety interlocks which
prevent the appliance from
operating if the collecting
vessel and its lid are not
correctly fitted or if the
hopper is unscrewed.
8 Ground coffee will dispense into the
collecting vessel and as soon as the
selected amount of coffee has been
ground, the unit will automatically
switch off. To stop the unit earlier,
press the 'Start/Stop' button.
9 Remove the collecting vessel and its
lid. Use the ground coffee as
required.
hints
G Empty the collecting vessel before it
becomes full.
G During grinding if all the coffee beans
do not move down into the grinding
chamber, shake the unit slightly.
This may occur if the coffee beans
are too oily or damp.
manuals search engine

care and cleaning

Always switch off and unplug before
G
cleaning.
Never put the machine in water or let
G
the cord or plug get wet.
To ensure freshly ground coffee, we
G
recommend cleaning the unit after
every use.
G Always ensure the collecting vessel
safety interlock and surrounding area
is free of ground coffee.
Make sure the hopper and collecting
G
vessel are empty of coffee beans or
coffee.
G Don't wash parts in the dishwasher.
lid, collecting vessel and lid
G Wash by hand, then dry thoroughly.
hopper
Unscrew the hopper by turning anti-
G
clockwise, never remove it if it
contains coffee beans.
G Brush away any ground coffee with
the brush provided.
power unit
G With the hopper removed, brush
away any ground coffee that may
have accumulated around the
grinding mechanism or coffee outlet.
G Wipe the body of the coffee grinder
with a damp cloth then dry
thoroughly.
G Don't use abrasives – they'll scratch
the plastic.
service
G
If the cord is damaged it must, for
safety reasons, be replaced by
Kenwood or an authorised Kenwood
repairer.
If you need help with:
G
using your machine or
G
servicing, spare parts or repairs
Contact the shop where you bought
your machine.
3