Countdown Function - Silvercrest SWEP 500 A1 Bedienungsanleitung

Countdown function

The countdown function is only available when the radio is switched off.
Set and save countdown
• Press and hold down the
the screen shows 0.00 D. The D blinks.
• Press the
5 countdown times are preset on the memory buttons and you can open
these directly using the corresponding memory button:
M.0/5
Button
M.2/7
Button
M.4/9
Button
• Press the
MEM
flashes on the screen. Now use the
a memory space; when you press the relevant memory key the time is
saved in this memory space and the time previously stored there
overwritten.
• When the
countdown mode.
Call up and activate the countdown function
• Press and hold down the
the screen shows 0. 00 D.
• Select the desired, saved countdown time with the aid of the
memory buttons.
• Press
pauses the countdown.
When the set time has been counted down, an alarm sound plays for one
minute becoming gradually higher in tone and louder.
• Press the
countdown mode.
Downloaded from www.Manualslib.com
UP DOWN
or button to set the desired time.
5:00
15:00
25:00
MEM
button to save the set time, the memory space indicator
MEMORY SCAN
button is pressed again you leave the
SNOOZE
to start the countdown. Pressing the
MEMORY SCAN
button to pause the countdown and leave
manuals search engine
MEMORY SCAN
button for around 2 seconds,
Button
Button
M.0/5
MEMORY SCAN
button for around 2 seconds,
- 23 -
M.1/6
10:00
M.3/8
20:00
M.4/9
– buttons to select
M.0/5
SNOOZE
button again
GB/CY
M.4/9
–