Hama 00012362 Bedienungsanleitung Seite 6

Note
When all codes are searched without success, the Universal
Remoote Control exits Auto Code Search and returns to
operational mode automatically. Currently stored code is
not changed.
5.4 Code Identification
The Code identification offers you the possibility, to determine
an already entered code.
5.4.1 Press the SETUP key until the LED indicator is
permanently lit.
5.4.2 Select the device you want to control using the device
key (e.g. TV). A successful selection is indicated by the
LED with one flash followed by permanent light.
5.4.3 Press SETUP key. The LED indicator flashes once
followed by permanent light.
5.4.4 To find the first digit, press the numeric keys from 0 to
9. The LED indicator flashes once to indicate the first
digit of the 4-digit code number.
5.4.5 Repeat step 5.4.4 for the second, third and fourth
digit.
TV VCR
AUX AMP
6. Special Functions
6.1 Punch Through Channel
The Punch Through Channel allows the PROG+ or PROG-
commands to bypass the currently controlled device and
switch the channels on a second device.All other commands
remain uninfluenced.
To activate the punch through channel setting:
• Press desired device mode key (e.g. TV).
• Press and hold "PROG+" key.
• Press desired device mode key (e.g. SAT).
• Release "PROG+" (the indicator flashes once if the setting
is activated).
CODES
SAT DVD
CBL DVBT
To deactivate the punch through channel setting:
• Press desired device mode key (e.g. TV).
• Press and hold "PROG-" key.
• Press desired device mode key (e.g. SAT).
• Release "PROG-" (the indicator is flashing twice if the
setting is deactivated).
6.2 Punch Through Volume
The Punch Through Volume allows the VOL+ or VOL-
commands to bypass the currently controlled device and
adjust the volume on a second device. All other commands
remain uninfluenced.
To activate the punch through volume setting:
• Press desired device mode key (e.g. TV).
• Press and hold "VOL+" key.
• Press desired device mode key (e.g. SAT).
• Release "VOL+" (the indicator flashes once if the setting
is activated).
To deactivate the punch through volume setting:
• Press desired device mode key (e.g. TV).
• Press and hold "VOL-" key.
• Press desired device mode key (e.g. SAT).
• Release "VOL-" (the indicator is flashing twice if the setting
is deactivated).
6.3 Macro Power
Macro Power enables you to turn two A/V devices on/off
simultaneously.
To activate the macro power setting:
• Press desired device mode key (e.g. TV).
• Press and hold "POWER" key.
• Press desired device mode key (e.g. SAT).
• Release "POWER" (the indicator flashes once if the setting
is activated).
To deactivate the macro power setting:
• Press desired device mode key (e.g. TV).
• Press and hold "POWER" key.
• Press desired device mode key (e.g. SAT).
• Release "POWER" (the indicator is flashing twice if the
setting is deactivated).
5