Driver Installation On Windows 98Se/Me; Installing The Software; Windows 98Se/Me - Hama Smart Backup Anleitung

Tighten the two screws at the rear of the housing
after you have inserted the hard drive fully into the
aluminium housing.
4. Driver Installation on Windows
98SE/ME
Connect the 2.5" hard drive housing to a free USB
socket on your PC.
The Hardware Wizard searches for new drivers for
the "USB 2.0 IDE Bridge".
Click "Next" to continue.
Select "Search for best driver for your device" and
click "Next" to continue.
Select "Enter a location:" only and click "Browse".
Open sub-folder "WIN98DRV" in folder "VT6204"
on the installation CD.
Downloaded from www.Manualslib.com manuals search engine
Click "Next" to continue after the above message
has been displayed.
Click "Finish" to complete driver installation.

5. Installing the software

5.1 Windows 98SE/ME

Insert the enclosed installation CD into the CD-ROM
drive of your PC.
Open the "VBTUCopy" directory in the "VT6204"
folder on the installation CD.
Run the "Setup.exe" fi le in this directory.
The installation wizard now starts automatically.
9